Axis Communications Network Print Servers Manual De Usuario

AXIS 5500 / AXIS 5550 User’s Manual

129

The test button is located on the front right hand side of the AXIS 

5500/AXIS 5550 and is used for:

•

Printing a test page to check the connection to the printer.

•

Printing a parameter list to see the print server’s current settings.

•

Performing a Factory Default of the print server.

If you want to change any of the parameters, use one of the methods 

Press the test button once to print a test page. The test page contains 

basic information about the AXIS 5500/AXIS 5550. It is recommended 

that you print a test page every time you connect the print server to a 

printer.

Press the test button twice to print a parameter list showing the current 

AXIS 5500/AXIS 5550 settings. This list provides comprehensive details 

of all the parameters and their current status. Refer to Section 16  The 

1. Remove the external power supply to switch off the print server.

2. Press and hold down the test button while you reconnect the external power 

supply. 

3. Continue to hold down the test button until the network indicator remains 

constantly lit. This should take about 20 seconds.

4. Restart the print server by disconnecting and reconnecting the external 

power supply.

AXIS 5550 has two printer ports. If just one of ports is connected to a printer, the test page will 

be printed on that port. If each port is connected to a printer, the default setting will send the 
test page to the parallel printer. The default behavior can be changed from the print server’s 
internal Web pages under 

Admin | General Settings => Change.

A factory default will reset all print server parameters and settings to their 
default values, except 

• installed certificate
• private  key