Axis Communications Network Print Servers Manual De Usuario
Basic Installation
AXIS 5500 / AXIS 5550 User’s Manual
17
in the print server’s Web interface. Refer to “Management and
If the host name matches another entry in the DDNS data base, the print
server deletes that entry before registering.
Notes:
Set the IP Address
with DHCP
Follow the instructions below to download the IP address using DHCP:
1. Edit or create a scope in the DHCP manager of the DHCP daemon. The
entries included in this scope should contain the following parameters:
• range of IP addresses
• subnet mask
• default router IP address
• WINS server IP address(es) or DDNS server IP address(es)
• lease duration
• subnet mask
• default router IP address
• WINS server IP address(es) or DDNS server IP address(es)
• lease duration
2. Activate the scope. The print server automatically downloads the DHCP
parameters. If you are using WINS or DNS, you should include at least one
WINS or DNS server IP address in the DHCP scope. Immediately after the IP
address has been received, the print server registers its host name and IP
address on the WINS alternatively DNS server. Refer to
WINS or DNS server IP address in the DHCP scope. Immediately after the IP
address has been received, the print server registers its host name and IP
address on the WINS alternatively DNS server. Refer to
Resolving Host Names” on page 16 for more information. The print server
can automatically download a customized
can automatically download a customized
config file from a TFTP server. Just
add the name of the config file and the TFTP server’s IP address to your DHCP
scope. The
scope. The
config file is downloaded immediately after the print server
receives its IP address.
3. You have now successfully set the IP address of your print server. Continue
Note:
• The default host name of the AXIS 5500/AXIS 5550 is ’AXIS’ followed by the last 6 digits in
the serial number. e.g. AXIS181636. The host name (Print server name) can be changed in
the PS_NAME. field on the
the PS_NAME. field on the
Admin | General Settings page.
• The host name limitations conclude that if you want to register the same host name at a
WINS server and a DDNS server, the host name should be no longer than 15 characters
and it should only contain the characters ‘A-Z’, ‘a-z’, ’0-9’ and ‘-’.
and it should only contain the characters ‘A-Z’, ‘a-z’, ’0-9’ and ‘-’.
• Refer to your system manuals or to your network administrator for instructions on how
host name resolutions are performed on your system.
You have to restart the print server to download the IP address.