Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Axis Communications
  4. Network Print Servers
  5. Manual De Usuario

Axis Communications Network Print Servers Manual De Usuario

Descargar
Página de 170
Management and Configuration
94
AXIS 5500 / AXIS 5550 User’s Manual
Managing
Print Servers
Follow the instructions below to access the AXIS 5500/AXIS 5550 using 
AXIS ThinWizard:
1. Click 
Manage Network in the main menu.
2. Select the network group, including the, from the drop-down list. All AXIS 
servers included in the network group appear in the window.
3. Click the link of the AXIS 5500/AXIS 5550 to access its internal Web page.
4. The ‘Srv’ and ‘Dev’ columns show the status of your print servers and printers.
Changing the IP
Settings
Using AXIS ThinWizard you can also set or change each print server’s IP 
parameters.
1. Click 
IP Settings in the main menu.
2. Select print server in the list.
3. Enter your data: IP address, Subnet mask, Default gateway and the print 
server’s password (default password is 
pass).
4. Click 
Set to save your settings.
5. Click 
Rescan to update AXIS ThinWizard and see the changes.
If Your Print Server is
not Shown in the List
If your print server is not shown in the list, click “Click here...”. By 
entering the serial number of the print server (found on the underside 
label) you will be able to set the print server’s IP parameters. 
Example: 00408c181cf0
Upgrading
Axis Servers
information about upgrading Axis servers using AXIS ThinWizard.
Multiple
Configuration and
Installation
Using AXIS ThinWizard it possible to change the settings of several Axis 
servers simultaneously. It is also possible to copy the configuration from 
one server to another. This is a convenient way to install a new server, 
based on the settings of an already existing server.
For additional information, please refer to the AXIS ThinWizard online 
help.
Using FTP for Print Server Management
Having assigned an IP address to your Axis Network Print Server, as 
you can change the Axis Network Print Server parameter settings using 
the File Transport Protocol (FTP).
Ensure that FTP Enabled is set to yes. To check this parameter, browse to 
the print server and select Admin | Network Settings | Detailed View | 
TCP/IP Network.