Axis Communications Network Print Servers Manual De Usuario

AXIS 5500 / AXIS 5550 User’s Manual

95

Editing the config file

Follow the instructions below to edit the config file using FTP: 

1. Log in to the Axis Network Print Server by typing:

ftp <host name>

 or 

ftp <IP address> 

in a DOS window (Windows) 

or in a UNIX shell.

2. Enter the user id and the password. (The default entries are 

root

 and 

pass

.)

3. Download the 

config file to your host by typing:

get config

4. Edit the file using your preferred text editor.

5. Save the 

config file to the Axis Network Print Server by typing: 

put config CONFIG

The example below describes how to upload and download the config file 

using FTP from a DOS window.

• It is important that the destination file is specified in capital letters. Otherwise the edits 

are temporary and will be lost once the Axis Network Print Server has been powered off.

• To  edit  the  config file from a Macintosh you will need FTP support such as MacTCP, Fetch 

or Anarchie. The procedure for editing the file is the same as described above.

> ftp npserver

connected to npserver.

220 AXIS 5500 FTP Network Print Server v7.00 Sep 06 

2004 ready.

Name (npserver:(none)): root

331 User name ok, need password

Password: pass 

230 User logged in

ftp> get config

200 PORT command successful.

150 Opening data connection for config 

(192,168,0,10,4,64), (mode ascii).

226 Transfer complete.

ftp: 10527 bytes received in 0.22Seconds 47.85 

Kbytes/sec)

ftp> put config CONFIG

200 PORT command successful.

150 Opening data connection for CONFIG 

(192,168,0,10,4,65), (mode ascii).

226 Transfer complete.

10527 bytes received in 0.22Seconds 47.85 Kbytes/sec)

ftp> bye

221 Goodbye.

>