Cisco Systems 815 Manual De Usuario

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules

Installing and Removing a DIMM

C-6

Cisco 815 Integrated Services Router Hardware Installation Guide

OL-9558-01

Step 2

Place the DIMM in an antistatic bag to protect it from ESD damage.

Installing a DIMM

Caution

Do not insert DIMMs into the same connector more than 25 times. Overuse can
damage the connector.

To install a DIMM, follow these steps:

Step 1

Make sure that both latches on the DIMM connector are open.

Step 2

Orient the DIMM so that the polarization notch lines up with the key in the
connector. See

Step 3

Carefully insert the DIMM into the connector.

Step 4

Carefully and firmly press the DIMM into the connector until both latches rotate
to the closed position against the DIMM.

Figure C-5

Installing a DIMM

Insert the DIMM

Latches rotate to closed position

155844