AEG 949600686 Manual De Usuario

13

1.  Remove the safety shield from the 
     drain cock.
2.  Place a bowl under the drain cock. 
     Make sure the bowl is large enough 
     to hold the oil in the container.
3.  Open the drain cock and let the oil 
     run into the bowl.
4.  Close the drain cock.

The drain cock must closed.
1.  Remove the metal filter and wash it 
     in warm soap water.
2.  Pour warm water with washing-up 
     liquid in the container. You can 
     leave the heating element down 
     when cleaning the container. Clean 
     the container with a brush.
3.  Place a bowl under the drain cock. 
     Make sure the bowl is large enough 
     to hold the water in the container.
4.  Open the drain cock and let the 
     water run into the bowl.
5.  Rinse the container in cold water.
     Remember to place a bowl under 
     the drain cock to catch the rinsing 
     water.
     Eventually wipe the container with 
     a dry clotts.
6.  Close the drain cock and replace 
     the safety shield.
     Place the metal filter with the 
     curved side upwards over the drain 
     hole in the container.
  

Closed

Open