Smeg A2PY-6 Manual De Usuario
Instructions for the User
10.2.2
The burner caps, flame diffuser rings and burners
The burner caps, flame diffuser rings and burners can be removed for
easier cleaning. Remove the pan stands and wash them in warm water
with a non-abrasive detergent, taking care to remove all deposits, and
wait until they are completely dry. Replace the flame diffuser rings,
checking that they are correctly in place with their respective burner caps,
making sure that the holes A in the flame diffusers are aligned with the
plugs and thermocouples.
easier cleaning. Remove the pan stands and wash them in warm water
with a non-abrasive detergent, taking care to remove all deposits, and
wait until they are completely dry. Replace the flame diffuser rings,
checking that they are correctly in place with their respective burner caps,
making sure that the holes A in the flame diffusers are aligned with the
plugs and thermocouples.
10.2.3
The plugs and thermocouples
For best performance, the ignition plugs and thermocouples
must always be kept thoroughly clean. Check them
frequently and if necessary clean them with a wet cloth.
Remove any dry residues with a wooden toothpick or a
needle.
must always be kept thoroughly clean. Check them
frequently and if necessary clean them with a wet cloth.
Remove any dry residues with a wooden toothpick or a
needle.
10.3 Cleaning the oven
To keep the oven in good condition, it must be cleaned regularly, after
allowing it to cool down. Remove all removable parts.
allowing it to cool down. Remove all removable parts.
In the auxiliary oven, remove the side runners by lifting them at the front
and extracting them from the hole at the back.
•
NEVER USE A JET OF STEAM FOR CLEANING THE
APPLIANCE.
APPLIANCE.
•
Clean the oven shelves and side runners with hot water and non-
abrasive detergents, rinse and dry.
abrasive detergents, rinse and dry.
73