Simrad AP26 Manual De Usuario
Simrad AP26 and AP27 Autopilots
24
20221586B
26
24
22
20
18
16
14
12
10
8
6
4
2
0
24
22
20
18
16
14
12
10
8
6
4
2
0
LO
res
pon
se p
ara
me
ters
HI r
esp
ons
e p
ara
me
ters
Transition Speed set to 9 Knots
Transition to LO parameters
with increasing speed: 10 Knots
with increasing speed: 10 Knots
Transition to HI parameters
with decreasing speed: 8 Knots
with decreasing speed: 8 Knots
Speed
Sailboat
When sailing in WIND mode, the parameters are automatically
changed by the direction of the wind as per below or by the boat
speed.
changed by the direction of the wind as per below or by the boat
speed.
The transition between HI and LO parameters and vice versa
will have a different characteristics with regards to the wind
angle compared with the transition controlled by the speed of the
boat.
If you loose too much speed e.g. when tacking, the parameters
will change to HI to gain sufficient rudder response. This should
be observed when setting the transition speed on sailboats.
will have a different characteristics with regards to the wind
angle compared with the transition controlled by the speed of the
boat.
If you loose too much speed e.g. when tacking, the parameters
will change to HI to gain sufficient rudder response. This should
be observed when setting the transition speed on sailboats.
2.10 Manual Parameter Selection
Manual selection of steering parameters is necessary if there is
no speed input to the autopilot or if you want to override the
automatic control.
no speed input to the autopilot or if you want to override the
automatic control.