Simrad AP26 Manual De Usuario
Installation
20221586B
25
To toggle between LO and HI parameters, press the "AUTO"
button two times quickly.
button two times quickly.
Quick
double
press
Notes !
1. If you are in NAV or WIND modes you need not enter AUTO
mode to manually change the parameter set. Just make a
quick double press on the AUTO button.
quick double press on the AUTO button.
2. The manually selected setting (HI or LO) will override the
automatic selection and remain in effect until you re-enter
any automatic mode from STBY.
any automatic mode from STBY.
2.11 U-Turn
This feature is very useful in a man overboard situation and
whenever you want to steer back on a reciprocal heading.
whenever you want to steer back on a reciprocal heading.
U-Turn changes the current set course to be 180 degrees in the
opposite direction. The user must decide whether the U-Turn
should be made to Port or Starboard when bringing the boat on
the new course. U-Turn is activated by a quick press on the
TURN/DODGE/INFO button. The autopilot will continue on
the set course until you press either the PORT or STBD button
to select the direction to make the U-Turn. If you do not press
PORT or STBD within 1 minute, the autopilot will return to the
AUTO mode and stay on course.
opposite direction. The user must decide whether the U-Turn
should be made to Port or Starboard when bringing the boat on
the new course. U-Turn is activated by a quick press on the
TURN/DODGE/INFO button. The autopilot will continue on
the set course until you press either the PORT or STBD button
to select the direction to make the U-Turn. If you do not press
PORT or STBD within 1 minute, the autopilot will return to the
AUTO mode and stay on course.
Press
TURN/DODGE
/ INFO to enter
U-TURN
Select
STBD
U-turn
Boat
makes
STBD
STBD
U-turn