Simrad AP26 Manual De Usuario

Simrad AP26 and AP27 Autopilots 

46

 

20221586B

 

If the actual wind angle is S-ing around the set wind angle or the 
rudder activity is too high, the ‘Wind response’ should be 
reduced. 
Range: 1 – 7 
Default: 3 
See also other relevant settings for WIND mode operation under 
STANDBY mode in this chapter. 

A number of instrument pages are available under each mode 
screen if the required NMEA 0183 sentences are provided (see 
paragraph 8.1) or the information is available on SimNet (page 
110). The INFO menu is accessed by a long press on the 
TURN/DODGE/INFO button. 
The mode screens for Standby, Auto and Nav mode have an 
alternative screen. 

Standby mode 
The main screen shows current 
heading with large figures. A long 
press on the TURN/DODGE/ 
INFO button gives you an 
alternative screen where the 
heading is shown together with 
heading source and rudder angle. 
You have to select this screen from 
the pages in the INFO menu. 

 

Auto mode 
As for Standby mode you can 
change the Auto mode main screen 
to show the set course, steering 
parameter, heading and rudder 
angle by a long press on the 
TURN/DODGE/INFO button. As 
for the STBY mode you have to 
select this screen from the INFO 
menu.