GTO GP-SW050 Manual De Usuario

COM

COM

COM

OPEN

CLOSE

STOP

CLOSE

EDGE

GTO Inc. Tallahassee, FL

SX4000  Logic   Board   Rev.  E

MIN

MAX

MIN

MAX

OFF

120

CYCLE

SAFETY

OPEN EDGE

RUN 2

OPEN

CLOSE

STOP

COM

COM

COM

MAX

OFF

120

  1.  Turn on operator power.

  2.   Press and release the

 OPEN 

button on the board and be prepared to press the 

STOP 

button    

 when the gate reached the desired open position/limit.

  3.   The 

buttons can be used to bring the gate to the precise open position. The

buttons    

 will slowly run the gate when pressed and stop the gate when released.

  4.   Once at the desired open position, press and hold the

 SET LIMIT 

button for 3 seconds or until    

  the alarm sounds and

is on. At this time, release the

 SET LIMIT 

button.

  5.  Be prepared to stop the gate when it reaches the closed position.

  1.   If not already closed, press and release the close button.

  2.   Press and release the

 CLOSE 

button on the board and be prepared to press the 

STOP 

button    

 when the gate reached the desired closed position/limit.

  3.   The 

buttons can be used to bring the gate to the precise closed position. The

buttons  

 will slowly run the gate when pressed and stop the gate when released.

  4.   Once at the desired closed position, press and hold the

 SET LIMIT 

button for 3 seconds or until   

  the alarm sounds and

is on. At this time, release the

 SET LIMIT 

button.

  5.  Open the gate to allow it to stop on its own.

  6.   Open and close the gate to verify proper operations. If limits are not set

 

  properly, redo limit setting steps above.