Philips DVP3560/12 Manual De Usuario
8
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
channel (refer to the TV user manual on how
to select the A/V input channel).
Select menu display language
Note
If this product is connected to a HDMI CEC compliant
•
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
1
Press
SETUP.
» [General Setup] menu is displayed.
2
Select
[OSD Language], and then press .
3
Press to select a language, and then press
OK.
Turn on progressive scan
Note
To use the progressive scan feature, you must connect a
•
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 2:
Connect to the component video jacks” for details).
“Connect” > “Connect audio/video cables” > “Option 2:
Connect to the component video jacks” for details).
Connect power
Caution
Risk of product damage! Ensure that the power supply
•
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
of the product.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.
•
1
Connect the AC power cable to the wall socket.
The product is ready to be set up for use.
»
4 Get
started
Prepare the remote control
1
Press and push the battery compartment to
slide it open (see “1” in the illustration).
slide it open (see “1” in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see “3” in the illustration).
(see “3” in the illustration).
Note
If you are not going to use the remote control for a long
•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1
Press to turn on this product.
EN