Philips DVP3560/12 Manual De Usuario
9
If a disc is loaded in this product, disc play
»
automatically starts.
One-touch standby
1
1
Press and hold on the remote control for
more than 3 seconds.
more than 3 seconds.
All the connected devices (if the device
»
supports one-touch standby) automatically
switch to standby.
switch to standby.
Note
Philips does not guarantee 100% interoperability with all
•
HDMI CEC devices.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc
•
compartment.
Do not touch the disc optical lens inside the disc
Do not touch the disc optical lens inside the disc
•
compartment.
1
Press
to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press
to close the disc compartment and
start disc play.
To view disc play, turn on the TV to the
•
correct viewing channel for this product.
To stop disc play, press
To stop disc play, press
•
.
Note
Check the types of discs supported (see “Your DVD
•
player” > “Playable media”).
If the password entry menu is displayed, enter the
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
If you pause or stop a disc, the screen saver appears after
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
If you pause or stop a disc, the screen saver appears after
•
5 minutes of inactivity. To deactivate the screen saver,
press DISC MENU.
After you pause or stop a disc and no button is pressed
press DISC MENU.
After you pause or stop a disc and no button is pressed
•
within 15 minutes, this product automatically switches
to standby.
to standby.
1
Turn on the TV to the correct viewing channel
for this product.
for this product.
2
Press
SETUP.
3
Press to select [Video Setup].
4
Select
[Component Video] > [Interlaced],
and then press OK.
5
Select
[Progressive] > [On], and then press
OK.
A warning message is displayed.
»
6
To proceed, select [Ok] and then press OK.
The progressive setup is complete.
»
Note
If a blank/distorted screen is displayed, wait for
•
15 seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
7
Press
SETUP to exit the menu.
8
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for
•
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
display. In this case, turn off the progressive scan feature
on both this product and the TV.
Use Philips EasyLink
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the
•
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
connected to TV. Refer to the TVs/devices manual for
details.
One-touch play
1
1
Press to turn on this product.
The TV (if supports one-touch play)
»
automatically turns on and switches to the
correct video-in channel.
correct video-in channel.
English
EN