GE zem200bf Instruccion De Instalación

Refer to diagram at
right for dimensions
when installing above
a Monogram single
oven.

Within opening of appropriate dimensions:
• Install a level base of plywood:

– Flush with lower edge of opening.
– Entirely covering floor of opening.

• 3/8" thick (min.) plywood must be sup-

ported by 2" x 4" or 1" x 2" equivalent
runners on all four sides.

• Finished floor must support a minimum of

100 pounds.

• Assemble JX827 accessory kit, refer to

“Installation” for details.

These microwve ovens may be installed under
virtually any cabinetry and is supplied with
all hardware necessary for under-cabinet
installation. The cabinet must be capable of
supporting the items in the cabinet plus an
additional 90 pounds from the bottom. Refer
to “Advance Planning” for more details.

Note: Trim kit JX827 is
required for installation above

a single oven.

Installation Preparation

5

24-7/8" 

±

 1/16"

Per Oven
Requirement

15" 

±

 1/16"

Front of Cabinet

Door

Bracket

Side of

Microwave