Adaptec 7220ss Guía Del Usuario
5-18
Configuring the Controller
2
Select Option Configuration and press Enter.
The Option Configuration menu appears.
3
Select Cache Lock and press Enter.
The Cache Lock menu appears. The current setting is marked
with an * next to it.
with an * next to it.
4
Select the option you want and press Enter.
Configuring the Battery
You can configure two settings related to the battery:
■
You can enable or disable the battery. The default setting is
Battery Enabled. See
Battery Enabled. See
.
■
You can set the battery age, or disable the battery life monitor.
See
See
Enabling and Disabling the Battery
If you do not use a battery in your controller, an alarm sounds. To
eliminate the alarm, you can set the Battery option to Disabled.
(The default setting is Battery Enabled.)
eliminate the alarm, you can set the Battery option to Disabled.
(The default setting is Battery Enabled.)
Note:
You should only disable the battery if you are
running the controller with an uninterruptable power
supply (UPS), which ensures that you will not lose power
to the controller.
supply (UPS), which ensures that you will not lose power
to the controller.
If you set the Battery option to Disabled, the controller does not
issue warning events or disable the write-back cache.
issue warning events or disable the write-back cache.
To enable or disable the battery:
1
From the System Menu, select Configuration Menu and press
Enter
Enter
.
The Configuration menu appears.
2
Select Option Configuration and press Enter.
The Option Configuration menu appears.