Adaptec 7220ss Guía Del Usuario

Select Battery and press Enter.

The Battery menu appears. The current setting is marked with 
an * next to it.

Select the option you want and press Enter.

You must reboot the controller for the change to take effect.

Your controller monitors the life of your battery and creates an 
event when the battery nears the end of its life. Controller batteries 
typically last about three years. The event reminding you to replace 
the battery occurs after approximately 35 months of use. The event 
appears each time you reboot the controller until you replace the 
battery and reset the battery age.

When you replace the battery, you must reset the battery age for 
the battery life monitor to work properly.

You can also set the battery age. You might want to use this option 
if you install a battery from another controller and want to reset the 
battery reminder to display at the right time. 

An option to disable the battery life monitor is also available.

We do not recommend disabling the battery life 

monitor. Battery failure during normal operation disables 
write-back cache, and leaves the system exposed to data 
corruption in the event of power loss.

To reset or change the battery age, or disable the battery life 
monitor:

From the System Menu, select Shutdown/Restart and press 
Enter

.

The system confirms that you want to shut down.

Select Yes and press Enter.

The system confirms that it has shut down.

Press Enter to reboot.