Lexmark Optra T Instruccion De Instalación

Each output expander consists of the expander 
and a removable tray. A paper bail, bracket, and 
labels are also included. 

After you carefully unpack the output expander, 
install it immediately; otherwise, the edges of the 
mounting brackets could damage tabletops or fab-
rics.

The output expander tray is designed to hold the 
weight of print material only. Do not use it as a shelf; 
excess weight may cause it to disengage from the 
output expander. 

Remove the top cover from the printer or 
previously installed output option. 

Slide the plastic bracket onto the static 
brush holder, located near the bottom of the 
output expander.

Optra T label

(colored triangle)

Bracket and bail

Labels

Tray