Lexmark Optra T Instruccion De Instalación
8
Install Paper Options and Printer
Attaching the Paper Bail
Note: Attach the paper bail to the top cover only if
you do not plan to install a 5-bin mailbox as
the top output option.
the top output option.
1
Remove the top cover of the printer and
slide the plastic bracket onto the static brush
holder. Adjust the bracket so it is centered
over the exiting paper.
slide the plastic bracket onto the static brush
holder. Adjust the bracket so it is centered
over the exiting paper.
2
Place the tips of the wire paper bail into the
ends of the plastic bracket so that the bail
curves downward.
ends of the plastic bracket so that the bail
curves downward.
3
Replace the top cover.
Attaching Decals to Paper Trays
Decals showing the number "1" are on your printer
and the standard input tray as shown. These
decals keep the standard input tray paired with the
printer.
and the standard input tray as shown. These
decals keep the standard input tray paired with the
printer.
If you purchased an Optra T616(n) or T614n
printer, or optional drawers, you received a sheet
of decals.
printer, or optional drawers, you received a sheet
of decals.
Peel the decals from the sheet and attach them to
the recessed areas on the drawer and the match-
ing tray as shown.
the recessed areas on the drawer and the match-
ing tray as shown.