Lexmark Optra T Instruccion De Instalación

Insert the mounting brackets into the slots 
on top of the printer, output expander or 5-
bin mailbox. Make sure the 5-bin mailbox is 
seated securely.

Note: If the 5-bin mailbox will be the topmost 

output option, remove the paper bail 
from the bracket on the top cover and 
store in a safe place.

Attach the top cover to the 5-bin mailbox. 

Note: Do not attach the paper bail unless you 

are mounting the 5-bin mailbox on the 
printer or an output expander.

Place the tips of the wire paper bail into the 
ends of the plastic bracket so that the bail 
curves downward.

The bail rests in the output tray of the 
expander below it, or in the printer output 
bin. 

Adjust the paper stops for the paper size 
you will use.

If you purchased an output expander or 5-bin mail-
box, you received a sheet of labels. These labels 
are provided so that you may label your various 
output bins.

The illustration indicates some places where you 
may attach the labels: output bin tray, paper stop, 
side cover, or wherever best suits your application. 

Mounting bracket

Mounting slot

Paper stops

Side 
cover

Paper 
stop

Labels