Lexmark Optra T Instruccion De Instalación
14
Install Paper Options and Printer
Installing a High-Capacity
Output Stacker
Optra T printer models T616(n), T614(n) and
T612(n) support one high-capacity output stacker.
T612(n) support one high-capacity output stacker.
The high-capacity output stacker is packaged with
installation instructions.
installation instructions.
Installing the Envelope Feeder
The envelope feeder attaches to the front of your
printer behind the lower front door. It can be
removed when you are not using it, making the
printer more compact.
printer behind the lower front door. It can be
removed when you are not using it, making the
printer more compact.
Refer to the User’s Guide, available on the Optra T
Publications CD, for information on using the enve-
lope feeder.
Publications CD, for information on using the enve-
lope feeder.
1
Push the release latch and open the lower
front door of the printer.
front door of the printer.
2
Lift open the envelope feeder connector
door.
door.
3
Align the tabs on the envelope feeder with
the slots on both sides of the printer and
gently push the envelope feeder into the
opening until it snaps into place.
the slots on both sides of the printer and
gently push the envelope feeder into the
opening until it snaps into place.
The envelope feeder tilts downward at a
slight angle when it is installed properly.
slight angle when it is installed properly.
Optra T label
(colored triangle)
Optra T label
(colored triangle)
Envelope feeder
connector door
connector door
Release latch
Slots