Lexmark Optra T Instruccion De Instalación
Configure Network Printer
25
3
When you finish setting the IP address, press Select until the word SAVED
appears briefly. Print a new network setup page to verify the parameters
are set as you intended.
appears briefly. Print a new network setup page to verify the parameters
are set as you intended.
Static ARP and telnet
You can use this method from any Windows, OS/2, or UNIX workstation. You need
to know the physical address of the printer to use this method. Also, your worksta-
tion and the printer must be on the same subnet.
to know the physical address of the printer to use this method. Also, your worksta-
tion and the printer must be on the same subnet.
1
Find the physical address (UAA) of the printer (for example, 00200022012F)
on the network setup page you printed earlier. If you have an Ethernet net-
work, use the number in the right column (canonical). If you have a Token-
Ring network, use the number in the left column (MSB).
on the network setup page you printed earlier. If you have an Ethernet net-
work, use the number in the right column (canonical). If you have a Token-
Ring network, use the number in the left column (MSB).
2
Set the IP address in your workstation ARP table. At a command prompt,
type a command line similar to the following, inserting the IP address you
want to assign and the UAA:
type a command line similar to the following, inserting the IP address you
want to assign and the UAA:
arp -s 192.168.236.24 00-20-00-22-01-2F
3
Set the IP address, netmask and gateway in the printer. To do this, telnet to
port 9000 on the printer by typing a command similar to the following:
port 9000 on the printer by typing a command similar to the following:
telnet 192.168.236.24 9000
4
Verify that the printer is up and running on the network.
ping 192.168.236.24
Print Server TCP/IP Setup Utility
You can use this simple utility to initialize the IP address if your workstation is run-
ning Windows 95, Windows 98 or Windows NT. You need to know the physical
address of the printer to use this method. In addition, your workstation and the
printer must be on the same subnet.
ning Windows 95, Windows 98 or Windows NT. You need to know the physical
address of the printer to use this method. In addition, your workstation and the
printer must be on the same subnet.
To install this utility, launch the Drivers, MarkVision and Utilities CD, do a custom
install to add network support, and select Print Server TCP/IP Setup Utility.
install to add network support, and select Print Server TCP/IP Setup Utility.
Note: Information on installing, using and troubleshooting the utility resides on the
Drivers, MarkVision and Utilities CD.
Using a browser to remotely view and manage printer
Once the IP address has been set (using any method), you can use your browser
to remotely view and manage the network printer. Functions include viewing
printer status in real time, resetting the printer, changing settings and so forth.
Type the printer IP address in the URL field of the browser (for example,
http: //192.168.236.24) and press Enter.
to remotely view and manage the network printer. Functions include viewing
printer status in real time, resetting the printer, changing settings and so forth.
Type the printer IP address in the URL field of the browser (for example,
http: //192.168.236.24) and press Enter.