Lexmark Optra T Instruccion De Instalación

If your Optra T printer is a network model or if you have installed a network option 
on a Optra T616, T614, T612, or T610, you can use the instructions in this step to 
attach and set up your printer on a network. 

Turn the printer power off.

Plug the network cable into the network port.

Turn the printer power back on.

Note: If you installed a MarkNet™ print server that has more than one network 

port, use only one of the ports.

Use the printer operator panel to print the network setup page. (Hint: Network 
Menu, Standard Network, STD Net Setup, Print, Print Setup Page. Or, if you have 
a MarkNet card in slot x: Network Menu, Network Option x, Network x Setup, 
Print, Print Setup Page.) 

The network setup page shows the printer physical address, known as the univer-
sally administered address (UAA), of the print server and other important data. 
Look for the UAA under the Network heading on the setup page. 

The UAA is a 12-digit number. The left column shows the address in MSB form 
and the right column shows the address in canonical form. Save this page to use 
later. 

Note: The UAA is preset at the factory. However, you can override it with an 

optional locally administered address (LAA) if you want some particular 
physical address for this printer.