Lexmark Optra T Instruccion De Instalación

In order to ensure adequate clearance 
when installing system board options, 
see “Install Memory and Optional Cards” 
on page 15 before you place the printer if 
you plan to:

install memory or option cards

will have less than 605.6 mm (24 in.) 
clearance on the left side of the printer.

Make sure your fingers are not under the printer when 
you set it down. Use the handholds on the printer or 
ask someone to help you lift it.

 

Ask someone to help you lift the printer by 
the handholds and lower it onto the duplex 
unit, optional drawer, table or printer cabinet. 

The tab, round hole and square holes on top 
of any drawer or unit will help you seat the 
printer so the edges are aligned properly. 
Make sure the printer is securely in place.

If your printer supports output options, see:

•  “Installing an Output Expander” on page 10

•  “Installing a 5-Bin Mailbox” on page 12

•  “Installing a High-Capacity Output Stacker” 

Handhold

Tab

Round hole

Square hole