KitchenAid 30-Inch 4 Element Induction Cooktop, Architect® Series II Guía De Instalación

Descargar
Página de 12
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.
Tools needed
Parts supplied
Brackets (2)
2
¹⁄₂" (6.4 cm) clamping screws (4)
#8 x 
³⁄₈" (9.5 mm) sheet metal screws (4)
Parts needed
A UL listed or CSA approved strain relief
UL listed wire connectors
Check local codes. Check existing electrical supply. See 
“Electrical Requirements” section.
It is recommended that all electrical connections be made by a 
licensed, qualified electrical installer.
Location Requirements
Make sure you have everything needed for correct installation. It 
is the responsibility of the installer to comply with the installation 
clearances specified in these instructions.
IMPORTANT: Observe all governing codes and ordinances. 
When installing cooktop, use minimum dimensions given.
To eliminate the risk of burns or fire by reaching over the 
heated surface units, cabinet storage space located above 
the surface units should be avoided. If cabinet storage is to 
be provided, the risk can be reduced by installing a range 
hood that projects horizontally a minimum of 5" (12.7 cm) 
beyond the bottom of the cabinets.
It is the installer’s responsibility to comply with installation 
clearances specified on the model/serial rating plate. The 
model/serial rating plate is located on the underside of the 
cooktop burner box.
30" (76.2 cm) cooktop model/serial rating plate location 
(models GCI3061, ICI500, KICU500)
Check the cooktop base for an approved installation label. 
Verify approved oven model number. If you don't find this 
label, your cooktop should not be used over a built-in oven. 
Contact your dealer to confirm that your cooktop is 
approved.
Use the countertop opening dimensions that are given with 
these Installation Instructions. Given dimensions are 
minimum clearances and provide 0" (0 cm) clearance.
Grounded electrical supply is required. See “Electrical 
Requirements” section.
Product Dimensions
30" (76.2 cm) Cooktop
Tape measure
Flat-blade screwdriver
Phillips head screwdriver
Hand or electric drill
Level
Marker or pencil
Pliers
¼" drill bit
Jigsaw
A. Model/serial rating plate location
Models GCI3061
Model ICI500
Models KICU500
A. 21
⁵⁄₁₆
" (54.1 cm)
B. 3
0⁵⁄₁₆
" (77.0 cm) 
C. 2
³⁄₈
" (6.0 cm)
A. 20
¹⁄₈
" (51.0 cm)
B. 3
0⁵⁄₁₆
" (77.0 cm) 
C. 2
³⁄₈
" (6.0 cm)
A. 21
⁵⁄₁₆
" (54.1 cm)
B. 3
0³⁄₄
" (78.2 cm) 
C. 2
³⁄₈
" (6.0 cm)
A
C
A
B