Cisco Cisco Firepower Management Center 2000 Guía De Instalación
5-4
Cisco NGIPS for Blue Coat X-Series Installation and Configuration Guide
Chapter 5 Managing Cisco NGIPS for Blue Coat X-Series
Using the Configuration Menu
To enter the configuration menu :
Step 1
Enter the following command at the X-Series CLI prompt:
application Sf3DSensor vap
-
group vap_group_name config
where
vap_group_name
is the name of the VAP group where Cisco NGIPS for Blue Coat X-Series is
installed.
Follow the procedures to change your configuration:
– To change the management interface, see
.
– To change the managing Defense Center, see
.
– To change the registration key, see
– To change the NAT ID, see
Changing the Management Interface
The following procedure explains how to change the management interface for a VAP group.
To change the management interface:
Step 1
From the Configuration Menu, select
1 Configure Management Interface
to change the management
interface.
Step 2
When prompted, enter the device name configured for the new management interface. This is the device
name attached to the circuit.
name attached to the circuit.
Step 3
From the Configuration Menu, select
5 Exit
to quit.
Step 4
Modify the corresponding circuit to use the new device name.
For more information, see
.
Step 5
Enter the following command to restart the application:
application Sf3DSensor vap
-
group vap_group_name restart
where
vap_group_name
is the name of the VAP group.
Changing the Managing Defense Center
The following procedure explains how to change the managing Defense Center for a VAP group using
the following steps:
the following steps:
Step 1
Delete Cisco NGIPS for Blue Coat X-Series from its managing Defense Center using the Device
Management page (
Management page (
Devices > Device Management
). See the FireSIGHT System User Guide for more
information.
Step 2
Change the managing Defense Center for the VAP group using the procedure described in this section.
Step 3
Re-add Cisco NGIPS for Blue Coat X-Series to the new managing Defense Center as described in
.