HP lc3760n Manual De Usuario

Connect the input source to the TV according to the 
type of connection:

■

Antenna or basic cable (TV cable or satellite) 
without using a set-top box; see “Connecting the 
cable TV or the air antenna” on page 10.

■

Cable or satellite with a separate set-top box; see 
“Connecting cable or satellite with a set-top box” 
on page 10.

■

In the case of a national emergency, natural 
disaster, or other emergency situation, an EAS 
message broadcasts. When this unit receives an 
EAS message, if the level of emergency is 
comparatively low, an alert text message displays 
on screen. If the level of emergency is high, the 
receiver is forced-tuned to a details channel.

■

Alert text messages display, and forced tuning 
occurs, even during paid programming. Even 
when forced tuning is active, the user can still 
change the channel.

■

If the unit is forced-tuned to a channel that has 
been blocked by Parental Control, the Parental 
Control setting is given priority, and the EAS 
message is not broadcast.

■

EAS messages may be broadcast not only through 
digital cable, but also through analog cable or 
over-the-air analog transmission. EAS alert 
messages broadcasted through cable are not 
received on this TV.

Use standard 75-ohm coaxial cable to connect a 
ground antenna or cable TV input source to the TV. Use 
shielded coaxial cable to reduce radio frequency (RF) 
interference.

Optional equipment, cable TV service, and all cables 
are sold separately.

Connect the input source coaxial cable to the 
Ant/Cable connector on the back of the TV.

Connect power to the TV; see “Connecting power 
to the TV” on page 16.

Turn on the TV; see “Turning the TV On and Off 
(Standby)” on page 17.

Connecting your TV directly to the audio and video 
output of your set-top box assures a more vivid picture 
and enhances your viewing enjoyment.

Optional equipment and all cables are sold separately.

You can connect a digital TV set-top box (air or cable) 
and other audiovisual equipment by using:

■

Component video and audio cables connected to 
Input 1 or Input 2 connectors on the TV.

■

S-video and audio cables connected to Input 3 
connectors on the TV.

n

■

■

c