buell s1 lightning '97 Manual
2-11
REAR WHEEL
REMOVAL
1.
Raise rear wheel off floor using
REAR WHEEL SUP-
PORT STAND (Part No. B-41174)
.
2.
Remove rear fender. See
FENDERS, REMOVAL/
INSTALLATION
on
page 2-54
.
3.
Remove rear brake caliper. See
.
NOTE
Do not operate rear brake pedal with rear wheel removed or
caliper piston may be forced out. Reseating piston requires
caliper disassembly.
caliper piston may be forced out. Reseating piston requires
caliper disassembly.
4.
Loosen rear axle nut (metric).
5.
Loosen rear axle adjuster nuts. Push wheel as far for-
ward as possible.
ward as possible.
6.
Slip secondary drive belt from bottom of rear wheel
sprocket and remove.
sprocket and remove.
7.
Remove rear axle nut (14) (metric), lock-
washer (13), and washer (12). Pull axle (3) and washer
(4) out from left side and remove wheel.
(4) out from left side and remove wheel.
Figure 2-8. Rear Wheel Mounting
Axle adjuster nut
Rear axle
nut (metric)
5574
Figure 2-9. Rear Wheel
1
2
3
4
5
6
7
13
10
14
9
8
12
11
1.
Screw (4) (metric)
2.
Rear brake rotor
3.
Rear axle
4.
Washer
5.
Wheel bearing
6.
Spacer sleeve
7.
Wheel
8.
Valve stem
9.
Wheel weight
10. Bearings (2)
11. Right axle spacer
12. Washer
13. Lockwasher
14. Axle nut (metric)
15. Belt sprocket
16. Washer (5)
17. Bolt (5)
11. Right axle spacer
12. Washer
13. Lockwasher
14. Axle nut (metric)
15. Belt sprocket
16. Washer (5)
17. Bolt (5)
17
15
16
b0013a2x