Garmin gpsmap 5212 Manual De Usuario
58
GPSMAP 5000 Series Owner’s Manual
Digital Selective Calling
d
SC
To turn trail lines off for tracked vessels:
1. From a chart screen, touch
Menu
>
Other Vessels
>
DSC
>
DSC Trails
.
2. Touch
Off
to turn trails off for every vessel.
To show or hide the trail line for a specific vessel that is sending position reports:
1. From the Home screen, touch
Information
>
DSC List
.
2. Select the vessel from the list, and then touch
Review
.
3. Touch
Trail
to show or hide the trail for the vessel on the Navigation chart.
To change the symbol and color of the trail line for a vessel:
1. From the Home screen, touch
Information
>
DSC List
.
2. Select any call from that vessel from the list, and then touch
Review
>
Edit
.
3. Select an option:
Touch
Symbol
to edit the symbol.
Touch
Trail Line
to edit the line color.
Placing an Individual Routine Call
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you
can use the chartplotter interface to set up an individual routine call. When setting up an individual
routine call from your chartplotter, you can select one of the following channels on which you want
to communicate. The radio transmits this request with your call.
The selection of a DSC channel is limited to those channels that are available in all frequency bands:
The selection of a DSC channel is limited to those channels that are available in all frequency bands:
6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77.
Note: The default channel is 72. Select
Channel
to select a different channel from the list. If you
select a different channel, the chartplotter will use that channel for subsequent calls until you call using a
different channel.
To make an individual routine call:
1. While viewing a chart, touch
Menu
>
Other Vessels
>
DSC List
.
2. Select the station to call from the list.
3. Touch
3. Touch
Review
>
Call with Radio
.
4. Touch
Send
to send the information about the call to the radio.
5. On your Garmin VHF radio, select
Call
.
Note: When initiating a call from the chartplotter, if the radio does not have an MMSI number
programmed, the radio will not receive call information.
Calling an AIS Target
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you
can use the chartplotter interface to set up an individual routine call to an Automatic Identification
System (AIS) target. For more information on selecting a channel other than the default channel
(Channel 72), see “
To make an individual routine call to an AIS target:
1. While viewing a chart, touch an AIS target .
2. Touch
2. Touch
AIS Vessel
>
Call with Radio
.
3. Touch
Send
to send the information about the call to the radio.
4. On your Garmin VHF radio, select
Call
.
•
•
•