Cisco Systems 7931G Manual De Usuario

Depending on how your phone is configured, you may receive an audio and/or visual alert about 
a call to your pickup group.

If you use the BLF Pickup feature on your phone, see 

.

You can park a call when you want to store the call so that you or someone else can retrieve it from 
another phone in the Cisco Unified Communications Manager (Unified CM) system (for example, a 
phone at a coworker’s desk or in a conference room). You can park a call by using these methods:

Call Park—Use the Park softkey to store the call. Your phone displays the call park number where 
the system stored your call. You must record this number and then use the same number to retrieve 
the call.

Directed Call Park—Press the Transfer softkey during a call. To store the call, dial the Directed 
Call Park number and press Transfer again.

Assisted Directed Call Park—Use the Assisted Directed Call Park button displaying an idle line 
status indicator. To retrieve the call from any other Cisco Unified IP Phone in your network, press 
the flashing Assisted Direct Call Park 

 button.

Store an active call 
using Call Park

During a call, press Park. (You may need to press the more softkey to 
see Park.) 

Note the call park number displayed on your phone screen.

Hang up.

Retrieve a parked call

Enter the call park number from any Cisco Unified IP Phone in your 
network to connect to the call.

Direct and store an 
active call at a directed 
call park number

During a call, press 

. 

Dial the directed call park number.

Press Transfer again to finish storing the call.

Retrieve a parked call 
from a directed call 
park number

From any Cisco Unified IP Phone in your network, enter the park retrieval 
prefix and dial the directed call park number. Or after entering the park 
retrieval prefix, press the 

 (flashing) (

)

 

to connect to the call.