GMC sonoma 2000 Manual De Usuario

4. Turn the bulb assembly counterclockwise to 

remove it.

5. Put the new bulb assembly into the headlamp

assembly and turn it clockwise until it is tight.

6. Plug in the electrical connector.

7. Put the headlamp lens assembly back into the

vehicle. Install the two retaining clips.

1. Remove the headlamp assembly as shown under

“One

-

Piece Composite Headlamp System” earlier in

this section.

2. Twist the bulb socket

counterclockwise to
remove it from the
headlamp assembly.

3. Pull the bulb straight out to remove it from 

the socket.

4. Push the new bulb into the socket until it snaps 

into place.

5. Put the bulb socket into the lamp assembly and twist

it clockwise until it is tight.

6. Put the headlamp assembly back into the vehicle.

Install the two retaining clips.