GMC sonoma 2000 Manual De Usuario

1. Remove the headlamp assembly as shown under

“Two

-

Piece Composite Headlamp System” earlier in

this section.

2. Locate the locking tabs

on the assembly.
Squeeze the tabs
together and push that
end of the assembly out
while holding the tabs.
The assembly will 
swing out.

3. Unplug the electrical connector.

4. Turn the harness bulb socket counterclockwise to

remove it. Pull the bulb straight out to remove it
from the socket.

5. Push the new bulb into the socket until it snaps 

into place.

6. Put the socket into the lamp assembly and turn it

clockwise until it is tight.

7. To replace the assembly, snap the outboard end of

the lamp assembly back into the vehicle. Then swing
the assembly in and snap it into place.

8. Replace the headlamp assembly. Install the two

retaining clips.