CyberData 930095K Manual De Usuario
Installing the VoIP Ceiling Speaker
Restore the Factory Default Settings
Operations Guide
930095K
CyberData Corporation
23
Figure 2-12. Reboot System Section
2. Click Reboot. A normal restart will occur as per
.
2.6 Restore the Factory Default Settings
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a
known state.
known state.
Each speaker is delivered with factory set default values for the parameters indicated in
Use the RTFM switch on the speaker face to restore these parameters to the factory default settings.
Note
When you use the RTFM switch, the factory default settings are restored for only the
parameters indicated in
parameters indicated in
. The other parameters in the current speaker
configuration will remain unchanged.
Table 2-10. Factory Default Settings
Parameter
Factory Default Setting
IP Addressing
static
IP Address
192.168.3.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
255.255.255.0