B+B SmartWorx WLNG1 Manual De Usuario

 
 

 
 

 

Maintain the All-in-One 

 

 
 

 30 

Clean the All-in-One 

 

 

 Unplug the battery from the All-in-One before doing any cleaning procedure. 

 

 

 Never spray or douse the All-in-One with any liquid. Use only dampened wipes, cloths, 

or swabs to clean the All-in-One. 

 

 

 Use only materials from the list below to clean the All-in-One (see "

," below). Other solvents or cleaners may damage the plastic, paint, or the adhesives 

used in the All-in-One. 

 

Cleaning materials 

The following materials may be used to clean the All-in-One: 

 

Cotton cloths 

 

Cotton swabs 

 

Baby wipes 

 

Deionized water 

 

Eyeglass cleaning wipes (anti-static and anti-fog types only) 

Clean outside surfaces 

Use a cotton cloth dampened with water to clean the outside surfaces of the All-in-One.  

 

To remove difficult material, such as gummy adhesive or built-up grime, use a cotton cloth 
dampened with deionized water or use a baby wipe, and dry with a dry cotton cloth. 

 

To clean hard-to-reach places, such as the cooling ribs of the case, use cotton swabs 
dampened with deionized water. 

Clean the imager window 

Use eyeglass cleaning wipes to clean the imager window. Eyeglass cleaning wipes provide the best 
anti-glare cleaning solution. 

○ 

Be sure to wipe away any build-up from the center area of the imager window. 

○ 

Cotton swabs may be used to lightly remove smudges from the window edges. 

 

 If eyeglass cleaning wipes are not available, use a cotton swab dampened with deionized 

water to clean the imager window.