B+B SmartWorx WLNG1 Manual De Usuario
Advanced use
48
10 Advanced use
System requirements
All-in-One device and accessories
Wireless network and server application
Computer with the following installed on it:
○
Windows® XP and Service Pack 2
○
Microsoft® .NET Framework 2.0 or later
○
HP sp400 Series Configuration Software
○
HP sp400 Series Template Design Software
USB-compliant cable that does not exceed three meters (10 feet) in length, with a type B 5-pin
plug at one end to connect to the All-in-One’s port
plug at one end to connect to the All-in-One’s port
NOTE:
If you are connected to the internet when you install the software and you do not have
.NET Framework installed on your computer, .NET Framework will automatically be downloaded
and installed.
and installed.
Download and install software
Two software programs are required to configure the All-in-One:
HP sp400 Series Configuration Software
HP sp400 Series Template Design Software
To download this software, visit
.
Set up the wireless network
Bluetooth
For instructions for using Bluetooth wireless, see the Bluetooth configuration instructions at
802.11b wireless
1.
Connect the All-in-One to a computer with a USB cable.
2.
Use the HP sp400 Series Configuration Software to configure the 802.11b settings. See
"
"
."
3.
Select the Network tab and configure the All-in-One to connect to your 802.11 network.
4.
Select the Server tab and configure the All-in-One to connect to your application server.
NOTE:
See the HP sp400 Series Configuration Software Users Guide for more detailed
instructions and help. It is available at
.