B+B SmartWorx WLNG551 Manual De Usuario

25

•  If you perform a partial or incomplete print, the SP400X will time out, emit a Hi-Lo tone, and the red tail lights will flash once.

Clear print data

If you find that you have an incomplete print or do not wish to print, two options are available:

•  Press the yellow CLEAR button on the control panel, then scan and print again. The SP400X will emit a single mid-tone note and the
 

green tail lights will turn off after the CLeAR button is pressed.

•  Wait for the SP400X to time out and erase the scan from the memory. The SP400X will emit a Hi-Lo tone and the red tail lights will
 

flash once, letting you know you can scan and print again.

SP400X Series - 5. Operate the SP400X