LaCie Dupli Disc DVD 125 16x 108655 Manual

page 37

This function allows you to overburn data beyond the normal limitation of your blank media. The default setting is Off.

This function allows you to ignore any error that occurs during the duplication. Normally, when an error occurs, the LaCie
Dupli Disc DVD125 displays an error message and stops the duplication. This function may be useful for copying defective
DVD or CD discs. The default setting is Off.

This function is not available.

This function is not available.

This function is not available.

This function is used to update the firmware of your Dupli Disc DVD125. If you want to update the firmware of your duplica-
tor, LaCie recommends you to check first the current version of the firmware.

This function is used to compare the current firmware of your Dupli Disc DVD125 and the version burned on the Firmware
CD you've received from LaCie.

This function is used to test the system: LCD display, SDRAM, IDE connectors and FLASH memory will be tested.

This function is used to recover the Factory Settings (default setting) and cancel all the changes you've made.

LaCie warns you that enabling this function may irreversibly damage your duplicator. LaCie strongly rec-

ommends you NOT to enable this function.

Only uses LaCie firmware CDs; using an unknown CD or an inappropriate firmware CD may damage

your Dupli Disc DVD125.