LaCie Dupli Disc DVD 125 16x 108655 Manual

page 40

In the event that a disc cannot be ejected from the DVD or DVD+/-RW drive using the tray open button (when no duplication
operation is being performed), an emergency eject operation will open the media tray. Switch off the LaCie Dupli Disc
DVD125 drive and unplug its power cable from the power outlet.

Turn off the drive and insert a small metal poker, such as an unbent paper clip, into the emergency eject hole until it presses
against the manual eject mechanism. You will feel the mechanism eject the CD tray. Use this method only when the tray open
button is not working.

- Insert a straightened paper clip (or similar object) and push to eject the tray if the load/eject button

does not work. In normal operation, the eject button should always be used to unload the tray. If you must use the emergency
eject hole, make sure the drive’s power is turned off and wait until disc rotation has stopped.

Initialize SDRAM

Initialize the memory of the system.

Detect Drives

Detect what drives are connected with the system.

User Abort!

Cancel the job during operation.

Analyzing

Analyze the source disc.

Source Drive Not Ready

Source drive is not ready to read.

Target Drive Not Ready

Target drive is not ready to write.

Source Disc Not Ready

Source disc is not ready to be read.

Make sure the LaCie Dupli Disc DVD125’s power is off and the power cable is unplugged before attempt-

ing the emergency ejection procedure.