TP-LINK AC1750 Manual De Usuario
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 105 -
Figure 4-106 Find IP & MAC Binding Entry
Click the
Enable All button to make all entries enabled.
Click the
Delete All button to delete all entries.
4.18.2
ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-107).
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-107).
Figure 4-107 ARP List
1.
MAC Address - The MAC address of the controlled computer in the LAN.
2.
IP Address - The assigned IP address of the controlled computer in the LAN.
3.
Status - Indicates whether or not the MAC and IP addresses are bound.
4.
Configure - Load or delete an item.
Load - Load the item to the IP & MAC Binding list.
Delete - Delete the item.
Click the
Bind All button to bind all the current items, available after enable.
Click the
Load All button to load all items to the IP & MAC Binding list.
Click the
Refresh button to refresh all items.
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.