APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario

However, if you have created additional Alert Profiles you can specify that a threshold use an 
Alert Profile other than Default.

– Select Cameras to Trigger in response to the alert. If desired, alert notifications generated in 

response to this threshold can include image captures from any Camera Pod 120s connected to 
your appliance. To include images from one or more connected Camera Pod 120s, check the 
check boxes that correspond to the desired pods. 

– Specify  a  User-specified URL and User-specified Description. You can use these fields to 

include additional user-specific information with any alert notifications that are generated using 
this threshold. 

8. Click OK to save this threshold.

A rate of increase threshold is defined by specifying a maximum acceptable increase in value for the 
sensor and a period of time value. If the value reported by the sensor rises by more than the specified 
maximum acceptable increase in less than the specified period of time an alert condition is reported. To 
define a rate of decrease threshold:

1. Start the Camera Pods, Sensor Pods, or Device Crawlers task by double-clicking on the appropriate 

icon.

2. Click Sensors... to open the Sensor Configuration window.

3. Select from the Sensors selection list the sensor for which you will define a threshold. A list of 

thresholds that have been previously defined for the selected sensor, if any, appears in the 
Thresholds selection list.

4. Click Add... to open the Select Threshold window. Select Rate of Decrease Threshold and then 

click OK to close the Select Threshold window.

5. Type in the Threshold Name field a name for this threshold.

6. Specify Basic threshold settings. From the Basic tab in the Thresholds pane:

a. Type in the Maximum Increase field (or use the arrows in the field to specify) the highest 

acceptable change value for the selected sensor. If the value reported by the sensor increases by 
more than the Maximum Increase value in a period of time that is equal to or less than the number 
of seconds specified in the Time Period field, an alert condition results.

b. Type in the Time Period field (or use the arrows in the field to specify) the number of seconds 

that defines the unacceptable change period. If the value reported by the sensor increases by more 
than the Maximum Increase value in a period of time that is equal to or less than the Time 
Period value an alert condition is generated.

c. Check the Enabled check box to enable the threshold. If this check box is not checked, the alert 

threshold will be saved but will not be active.

d. Add to the Threshold-Specific Addresses list the e-mail addresses of any personnel to whom e-

mail alert notifications should be sent if this threshold triggers an alert condition. Click Add..., 
type in the e-mail address to which the alert notification will be sent, and then click OK. 

The Alert Profile drop box will appear in the Advanced tab only if additional 
Alert Profiles have been created. For more information see “Creating an Alert 
Profile” on page 63.