Greisinger EASYLOG 80 CL Humidity: 0 - 100 % r.H · Temperature: -25 to +60 °C · Pressure: 300 - 1100 hPa Temperature Dat 603414 Hoja De Datos

Los códigos de productos

603414

E40.0.01.6C-02 Operating

Manual

EASY

LOG

80 CL

Page 6 of 12

7.2 Operating possibilities at the device - logger operation

Function

Procedure

Display and adjust
cycle time

Push button

and

at the same time.

The main display shows “CYCL”. The secondary display
shows the currently adjusted cycle time [in sec.].
If the logger is currently not recording, the desired cycle time
[4 sec to 5h (18000 sec)] can be adjusted via the buttons

and

Press button

again to confirm your adjustments and to

leave the menu.
Note:

If no key is pressed for more than 2 min, the menu is
quit without saving.

Start recording

Push button

for about 5 seconds.

The main display shows “run”.

The secondary display shows “no”.

To start recording select “YES” with the arrow keys
(button

) and verify with

Note:

If no key is pressed for more than 2 min, the menu is
quit without saving.

Stop recording

Push button

for about 5 seconds.

The main display shows “HoLd”.
The secondary display shows “no”.
To stop recording select “YES” with the arrow key
(button

) and verify with

Note:

If no key is pressed for more than 2 min, the menu is
quit without saving.

Notice:

If you have activated one of the following options
• “logger stop via buttons disabled”
• “do not stop active logger”
at the configuration of the logger the menu to
stop the recording cannot be called.

SET