Blade 180 QX HD RTF BLH7400 Hoja De Datos

1

BLH3506

Main Gear: BMSR/X, mCP X, mQX

2

BLH3515, 
EFLH2215

Outer Shaft Bearing 3 x 6 x 2mm(2): 
BMCX/2/MSR/X, FHX, MH-35, MCP 
X, mQX

3

BLH7401A

5-in-1 Control Unit, RX/ESCs/Mixer/
Gyros/Camera Control: 180 QX HD

4

BLH7402

Canopy: 180 QX HD

5

BLH7403A

5-in-1 Mounting Frame: 180 QX HD

6

BLH7404

Landing Gear 180 QX HD

7

BLH7502

Thruster Boom with Wiring (2): mQX

8

BLH7503

Motor with Pinion, Clockwise Rotation: 
mQX

9

BLH7504

Motor with Pinion, Counterclockwise 
Rotation: mQX

10 BLH7513

Propeller Shaft, Carbon: mQX

11 BLH7405

Propellers, CW & CCW Rotation, Orange 
(2): 180 QX HD, mQX, 1 Propeller,
Orange (CW), 1 Propeller,
Orange (CCW), 2 Screws

12 BLH7406

Propellers, CW & CCW Rotation, Black 
(2): 180 QX HD, mQX, 1 Propeller, 
Black (CW), 1 Propeller, Black (CCW), 
2 Screws

13 BLH7561

Motor Mount with Landing Skid: mQX

14 BLH7562

Motor Mount Cover (2): mQX

15 EFLA801

Digital Video Camera With
Still Capability

16 EFLB5001S25 500mAh 1S 3.7V 25C LiPo Battery

EFLC1010

1S USB Li-Po Charger, 500mA JST

EFLH1063

MLP6DSM SAFE Transmitter

LED on the receiver fl ashes rap-
idly and the quadcopter will not 
respond to the transmitter (after 
binding).

Less than a 5-second wait between fi rst 
powering on the transmitter and connect-
ing the fl ight battery to the quadcopter.

Leave the transmitter powered on. Discon-
nect and reconnect the fl ight battery to the 
quadcopter.

The quadcopter is bound to a different 
model memory (ModelMatch™ transmit-
ters only).

Select the correct model memory on the 
transmitter. Disconnect and reconnect the fl ight 
battery to the quadcopter.

Flight battery or transmitter battery charge 
is too low.

Replace or recharge batteries.

Aircraft or transmitter is too close to
large metal object, wireless source or
another transmitter.

Move aircraft and transmitter to another
location and attempt connecting again.

Crashes immediately upon lift-off

Propellers in wrong locations or 
incorrect fl ight mode selected.

Ensure propeller direction and motor
direction are correct.