Wr Rademacher DuoFern 14234511 Wireless blind cord winder Flush mount 14234511 Hoja De Datos
Los códigos de productos
14234511
28
EN
17. Setting the position of the sun
1.
/
Move the roller shutters to the
desired position and stop.
17.1 Switching the automated solar function on/off
1.
Press and hold the solar button for
approx. 1 second.
2.
Observe the solar LED:
OFF
The automatic solar function is switched off.
The automatic solar function is switched off.
ON
The automatic solar function is switched on.
The automatic solar function is switched on.
Flashing
The automated solar function is active,
The automated solar function is active,
the roller shutters will be lowered to the
position of the sun. The LED continues
to flash when the roller shutters are in the
position of the sun.
You can set an arbitrary position (position of the sun)
which your roller shutters will lower to when the automated
solar function is activated.
The automated solar function enables brightness-depend-
ent control of your roller shutters. The control signals for
this function are provided by a light sensor on the DuoFern
network.
When the automated solar function is triggered, your
When the automated solar function is triggered, your
roller shutters will then lower to the configured position
of the sun.
2.
+
Save the position of the sun.
The solar LED flashes by way of confir-
mation. Once the key is released, the
automated solar function is activated and
the LED lights up permanently.