TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

206

 

LLDP function enables network devices to advertise their own device information periodically to 

neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored by its 

neighbor in a standard MIB, so it is possible for the information to be accessed by a Network 

Management System (NMS) using SNMP. 

The  lldp  command is used to enable LLDP function. To disable the LLDP 

function, please use no lldp command.   

Global Configuration Mode 

Enable LLDP function globally: 

The  lldp hold-multiplier command is used to configure the Hold Multiplier 

parameter. The aging time of the local information in the neighbor device is 

determined by the actual TTL value used in the sending LLDPDU. TTL = Hold 

Multiplier * Transmit Interval. To return to the default configuration, please use 

no lldp hold-multiplier command.