Manualsbrain.com
  1. Manuales
  2. Marcas
  3. TP-LINK
  4. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch
  5. Hoja De Datos

TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

Los códigos de productos
TL-SL3428
Descargar
Página de 232
TL-SL3428/TL-SL3452
JetStream L2 Managed Switch CLI Guide
 
209
 
Syntax 
lldp transmit 
no lldp transmit 
Command Mode 
Interface Configuration Mode (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example 
Enable Fast Ethernet port 1 to transmit LLDPDU: 
TL-SL3428(config)# interface fastEthernet 1/0/1 
TL-SL3428(config-if)#lldp transmit 
lldp snmp-trap 
Description 
The lldp snmp-trap command is used to enable the port’s SNMP notification. If 
enabled, the port will notify the trap event to network management system. To 
disable the ports' SNMP notification, please use no lldp snmp-trap command. 
Syntax 
lldp snmp-trap 
no lldp snmp-trap 
Command Mode 
Interface Configuration Mode (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example 
Enable the SNMP notification for Fast Ethernet port 1: 
TL-SL3428(config)#interface fastEthernet 1/0/1 
TL-SL3428(config-if)#lldp snmp-trap 
lldp tlv-select 
Description 
The  lldp tlv-select command is used to configure TLVs to be included in