TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

12

 

allows you to monitor, configure and manage the switch in Privileged EXEC Mode, Global 

Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode. 

Users get the privilege to the User level once connecting console port with the switch or logging in 

by Telnet. However, Guest users are restricted to access the CLI. 

Users can enter Privileged EXEC mode from User EXEC mode by using the enable command. In 

default case, no password is needed. In Global Configuration Mode, you can configure password 

for Admin level by enable password command. Once password is configured, you are required to 

enter it to access Privileged EXEC mode.   

The following conventions are used in this Guide: 



 

Items in square brackets [ ] are optional 



 

Items in braces { } are required 



 

Alternative items are grouped in braces and separated by vertical bars. For example: speed 

{10 | 100 | 1000 } 



 

Bold indicates an unalterable keyword. For example: show logging 



 

Normal Font indicates a constant (several options are enumerated and only one can be 

selected). For example: switchport type { access | trunk | general } 



 

Italic Font indicates a variable (an actual value must be assigned). For example: bridge 

You should pay attentions to the description below if the variable is a character string: 



 

These six characters ” < > , \ & can not be input. 



 

If a blank is contained in a character string, single or double quotation marks should be used, 

for example ’hello world’, ”hello world”, and the words in the quotation marks will be identified 

as a string. Otherwise, the words will be identified as several strings. 

Some parameters must be entered in special formats which are shown as follows: