TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 



Here you can enable or disable loopback detection function
globally. 

Set a loopback detection interval between 1 and 1000 seconds. 
By default, it’s 30 seconds. 

Time after which the blocked port would automatically recover to 
normal status. It can be set as integral times of detection interval.

Here you can enable or disable web automatic refresh. 

Set a web refresh interval between 3 and 100 seconds. By default, 
it’s 3 seconds. 



Click the Select button to quick-select the corresponding port 
based on the port number you entered. 

Select the desired port for Loopback Detection configuration. It is 
multi-optional. 

Displays the port number. 

Enable or disable loopback detection function for the port. 

Select the mode how the switch processes the detected loops. 


  Alert: When a loop is detected, display an alert. 



  Port based: When a loopback is detected, display an alert 

and block the port. 

Select the mode how the blocked port recovers to normal status. 


  Auto: Block status can be automatically removed after 

recovery time. 



  Manual: Block status only can be removed manually. 

Displays the port status whether a loopback is detected. 

Displays the port status about block or unblock. 

Displays the LAG number the port belongs to. 

Manually remove the block status of selected ports. 

1.  Recovery Mode is not selectable when Alert is chosen in Operation Mode. 

2.  Loopback Detection must coordinate with storm control. 

 

LAG (Link Aggregation Group) is to combine a number of ports together to make a single 

high-bandwidth data path, so as to implement the traffic load sharing among the member ports in 

the group and to enhance the connection reliability.   

38