Hitachi GR2000 Manual De Usuario
Component Details
GR2K-GA-1002
3-17
Rev. 6.03
3.4.2
RP-C/RP-C6
The RP-C and RP-C6physically appear as Figure 3-21. The switch, LED display
functions of the RP-C and RP-C6 are the same as those of the RP-A1. The additional
LEDs are for test purposes only.
functions of the RP-C and RP-C6 are the same as those of the RP-A1. The additional
LEDs are for test purposes only.
Figure 3-21 RP-C/C6 Front Panel View
Switch and LED indication
Table 3-14 RP-C/RP-C6 switch and function of LED indications
Nam
Name of switch
and LED
and LED
Status
Content
STATUS
LED: Green/
Yellow/ Red
Yellow/ Red
Shows the operating
condition of RP.
condition of RP.
Green: Operable operation
Yellow: Blocking and cock insertion and removal
possible.
Green blinking: Under preparation (being started up.)
Red: Fault
Extinguished: Operation not possible (Including the
device power supply being turned off)
Yellow: Blocking and cock insertion and removal
possible.
Green blinking: Under preparation (being started up.)
Red: Fault
Extinguished: Operation not possible (Including the
device power supply being turned off)
S1
LED: Green
Don’t care
S2
LED: Green
Don’t care
S3
LED: Green
Don’t care
S1
LED: Green
Don’t care
S2
LED: Green
Don’t care
S3
LED: Green
Don’t care
or