Graco 332235A - Direct Immersion Kit 16U764 for 2570ES Manual De Usuario
332235A
5
Removing Hydraulic Head and Pump
1.
Follow Pressure Relief Procedure, page 4.
2.
Allow unit to cool.
3.
Remove two hydraulic lines from head and body.
4.
Remove suction set from pump.
5.
Remove four mounting bolts on pump assembly and
set assembly out of the way.
set assembly out of the way.
6.
Remove two black plugs.
NOTE: Protect open hydraulic ports from debris and
contamination.
NOTE: Protect open hydraulic ports from debris and
contamination.
BURN HAZARD
Equipment surfaces and fluid that’s heated can
become very hot during operation. To avoid severe
burns, do not touch hot fluid or equipment. Wait until
equipment/fluid has cooled completely.
become very hot during operation. To avoid severe
burns, do not touch hot fluid or equipment. Wait until
equipment/fluid has cooled completely.
hydraulic
ti20953a
lines
suction
set
pump
ti21180a
bolts
pump
assembly
assembly
ti7598a
ti21178a
hydraulic
ports
ports
plugs
ti7599a