Creative 2030 Manual De Usuario

Configuration 
Settings

1. Click the Configuration tab (see 

Figure 4-3). In this tab, you can change the 

default configuration settings below.

2. To create a new profile, click the Profile 

box, and then type a name in the box.

3. Click the Create button.
4. To switch between profiles, click the Profile 

box, and then click the profile that you 

want.

5. Click the Activate button.
6. To remove a profile, click the Profile box, 

and then click the profile that you want.

7. Click the Remove button.
8. Click the Operating Mode box.

If you are connecting to a network through 

an access point, click Infrastructure.

If you are connecting to a network without 

an access point, click Ad-hoc.

9. Click the Service Set Identifier (SSID) box.

In Infrastructure mode, set the SSID to the SSID of the access point.

In Ad-hoc mode, set the SSID to the SSID of the Ad-hoc station you want to 

connect.

10.Click the Transfer Rate box, and then click the transfer rate that you want.
11.Click the Channel box.

In Infrastructure mode, you need not set the channel. The channel  for the access 

point is already set for you.

In Ad-hoc mode, set the channel to the channel of the Ad-hoc station you want 

to connect.

A profile is a set of

pre-defined values.

(SSID) is case sensitive.