Creative 2030 Manual De Usuario

Encryption Settings

1. Click the Encryption tab (see Figure 4-5). 

To enable WEP, click the Encryption (WEP) 

box, and then click the number of bits that 

you want.

2. The type of encryption option depends on 

your access point encryption settings. If you 

want to create a WEP key entry using a 

passphrase, click the Create with 

Passphrase option, and then type a series 

of alphanumeric characters in the 

Passphrase box. A series of hexadecimal 

values will be created automatically.

3. If you want to create a WEP key entry 

manually, click the Manual Entry option. 

By default, hexadecimal values are used. 

For more information, see “Hexadecimal” on 

4. If you want to use ASCII code for the 

encryption keys, click the ASCII check box to select it, and then complete the 

key table with random ASCII characters. Initially, you may need to fill in all the 

key entries. These keys serve as passwords that encrypt your data before 

transmission.

5. Click the Default Tx Key box, and then click the key that you want to use to 

encrypt your data with.

6. Click the Apply Changes button to save the settings.

• For 

 you have 

three options: Disabled, 

64 Bits, and 128 Bits. 

All wireless network 

devices in a Local Area 

Network (LAN) must have 

the same WEP settings 

and WEP key entry for 

this feature to work. If 

WEP is disabled, the data 

is not encrypted before 

being transmitted. To 

enable encryption, you 

must select either 64 Bits 

or 128 Bits.

• The type of Encryption 

option to use depends on 

your Access Point 

encryption settings.

• Use “0”s for unused keys.